Products
   

Beltsway Switch

 
Principle of Operation

The belt sway switch is used for sensing the swaying of the conveyor belts due to uneven loading, worn roller surface etc. the switch is to be mounted in near vicinity of the conveyor belt with a small clearance between contact roller and the belt edge to allow normally accepted swaying. When the swaying exceeds allowable limit, the belt edge would push the contact roller which in turn would actuate the switch. When swaying stops the switch would automatically reset under the action of resetting spring.               

Material specification

Standard assembly enclosed in aluminum housing


     Copyrights @ Revathi Electronics & Controls. 2008 All rights reserved Website designed by Compusoft Technologies
     Site Best Viewed in 1024 x 768 Resolution, and Internet Explorer 5.0 & ABOVE